Vincent Parts In Production
All of my parts interchange and fit with original parts.
see also: Vincent Prop Stands Section
H13 - SERRATED WASHER- $16
Serrations are crisp. These will be cast (to look like the original cast ones)
and broached square to exactly 0.500". Not machined stainless with a sloppy 0.510" hole.
Cadmium plated. Heat Treated 4140 chromoly to Rockwell 40C.
5 used, Twins and Singles.
H35/1AS - BRAKE ROD WING NUT, type 2- $20
Complete unit is cast bronze. Raised mold number "5" as per originals.
2 used,Twins and Singles.
G77 - KICKSTART FOOTPIECE (Right Hand)- $45
Cadmium plated, Early B type. Raised G77, foundry mark.
Heat Treated 4140 chromoly to Rockwell 40C.
Twins.
F72/6 - KICKSTART FOOTPIECE (Right Hand)- $45
Cadmium plated, Later type. Raised F72/6, foundry mark.
Cast 4140 Chromoly steel, not machined stainless.
Heat Treated 4140 chromoly to Rockwell 40C.
Twins.
F25/7 - REAR BRAKE PEDAL LEVER- $55
Cadmium plated, 4140 Chromoly Steel, heat treated to 40 Rockwell C.
With bushing. Twins and Singles.
FT93 - PILLION FOOTREST BRACKET- $40
Raised lettering and the original surface texture.
Cast 4140 Chromoly steel, not machined bronze.
Twins and Singles.
FF31 type 1 - HANDLE BAR CAP- $24
Early series B. 45 degree countersink. Surface texture as per originals. Cast 4140 chromoly steel.
2 used, Twins and Singles.
FF31 type 2 - HANDLE BAR CAP- $24
Later C's. Surface texture as per originals. Cast 4140 chromoly steel.
2 used, Twins and Singles.
G81 - INDICATOR LEVER- $26
Cadmium plated.
Lost Wax, cast 4140 Chromoly steel gives great detail and strength.
Twins.
F55 - BALANCE BEAM- $65
Raised F55 and the original surface texture.
Twins and Singles.
G108/2 - GEAR LEVER ARM- $65
Ever have one break on a Road Run and even though you found a welder,
it still broke again?
This heat treated 4140 chromly steel lever will not break,
no need to carry a spare. Serrations are crisp. C & D Vincent Twins.
Raised characters: G108/2 part number and circle SA forging mark as per original parts.
Cadmium plated. Easily chromed, ask them not to remove raised characters.
Replacement Mold has been made.
F72 - FOOTREST LEFT HAND- $25, Seconds, Just a few of these, stainless spacers, 0.010"-0.025", supplied
Don't let the shims put you off - your originals probably need shims, too.
Reach down and grab them and see if they couldn't use 0.005" to 0.010" tightening.
These look and work great. Difficult to see spacers (usually 0.010" to 0.015") when installed.
4140 Chromoly Steel, heat treated to 40 Rockwell C.
Also, Pillion Footrest Right Hand. Twins and Singles.
Replacement Mold has been made.
F72/1 - FOOTREST RIGHT HAND- $25, Seconds, Just a few of these, stainless spacers, 0.010"-0.025", supplied
Don't let the shims put you off - your originals probably need shims, too.
Reach down and grab them and see if they couldn't use 0.005" to 0.010" tightening.
These look and work great. Difficult to see spacers when installed.
4140 Chromoly Steel, heat treated to 40 Rockwell C.
Also, Pillion Footrest Left Hand. Twins and Singles.
K5 - 3/16"x1/4" OPEN SPANNER- $20
JENBRO. Lost Wax 4140 chromoly steel castings look like jewelry (same process).
Heat Treated 4140 chromoly to Rockwell 40C.
Twins and Singles.
K6 - 1/4"x5/16" OPEN SPANNER- $25
JENBRO. Lost Wax 4140 chromoly steel castings look like jewelry (same process).
Heat Treated 4140 chromoly to Rockwell 40C.
Twins and Singles.
K7 - 5/16"x3/8" OPEN SPANNER- $25
JENBRO. Lost Wax 4140 chromoly steel castings look like jewelry (same process).
Heat Treated 4140 chromoly to Rockwell 40C.
Twins and Singles.
K8A - 7/16"x1/2" OPEN SPANNER- $35 (big wrench)
JENBRO. Not originally in the tool kit. I like 2 of the 7/16"W and a 1/2"W when I'm riding.
Lost Wax 4140 chromoly steel castings look like jewelry (same process).
Heat Treated 4140 chromoly to Rockwell 40C.
Twins and Singles.
K19C - 1/8" BSW OPEN SPANNER- $15
CARBON. Also has 3/16 BSF in raised characters.
Lost Wax 4140 chromoly steel castings look like jewelry (same process).
Heat Treated 4140 chromoly to Rockwell 40C.
Twins and Singles.
VINCENT CONTROL LEVERS
PR15B - VINCENT "B" VALVE LIFTER LEVER ASSY.- $250.
Series 'B'and some series "D". Made by Bowden. All 3 castings are Bronze.
Fasteners are stainless.
PR15B - VINCENT "B" VALVE LIFTER LEVER ASSy. - Unfinished set - $35
Series 'B'and some series "D". Made by Bowden. All 3 castings are Bronze.
PR14Bowden - VINCENT CLUTCH LEVER ASSY.- $35 set of 3 unfinished castings. Same castings as
PR16Bowden, machine the cable slot opposite on lever.
Used on some 1953 Series 'C'. Made by Bowden. Lever and bracket are bronze like originals.
"Bowden" on steel clip. Shown is a finished part made from the unfinished castings
and the unfinished castings.
PR16Bowden - VINCENT BRAKE LEVER ASSY.- $35 set of 3 unfinished castings. Same castings as
PR14Bowden, machine the cable slot opposite on lever.
Used on some 1953 Series 'C'. Made by Bowden. Lever and bracket are bronze like originals.
"Bowden" on steel clip. Shown is a finished part made from the unfinished castings
and the unfinished castings.