45", K Model, Sportster HARLEY PARTS



1229-27 - AIR INTAKE CAP - $65

Made from an NOS part. Nickle plated. Cast steel, open backed, 3 1/4" diameter. 1927-1931 Harley-Davidson Twins. Made in the USA.



1238-24 - THROTTLE SHAFT LEVER - $38, nickel plated

Harley-Davidson, Linkert & Schebler, 1924 to 1933 - 61" & 74" Twins. 1930 to 1933 DLD & RLD, later 1933 to 1935 - 45" Twins.



1238-33 - THROTTLE SHAFT LEVER - $38, nickel plated

Harley-Davidson, Linkert & Schebler, 1933VLD, 1934 to 1936, 74" & 80" Twins. 1935 to 1940+ - 45" Twins



1238-37 - THROTTLE SHAFT LEVER - $35, cadmium plated

Shown is an original part. Harley-Davidson, Linkert, 1937 to 1948, 74" & 80" Flathead Twins. 1935 to 1948, 45" Flathead Twins.



2076-29 - STARTER CRANK - $125

45" Twins, 1929-1940 and Servicars.



2653-30 - FRONT FORK TRIPLE CLAMP - 1930 - $175

Heat treated 410 chromoly Steel to Rockwell 40C. 1930 - 45" & 74" Twins.



2653-37 FRONT FORK TRIPLE CLAMP - $120, quickly made to order

Heat Treated 4140 Chromoly Steel to Rockwell 40C. Harley-Davidson, 45" Twins, 1937-1939



3105-36T3 - SEAT BAR, Type 3 - $180 with hardened, ground, Steel Double Bushings

2 clevis pin holes, 2 clevis pin studs on each side,large double clevis pin bushings. Grease fitting on top. 1938-1940 Big Twins and 45".



3105-36T3-45 + 3105-36T4-45 (shown) - SEAT BAR, Types 3 or 4, racing - $190 with hardened, ground, Steel Double Bushings. MADE TO ORDER.

type 3 for 1938-1940 45" racers and type 4 for 1941 and up racers. Spring plate almost 9 inches long.



4064-29 - BRAKE ROD ADJUSTING NUT- $25

1929-1931 Singles + 45" and 1932-1934 - 21" Singles.

4064-32 - BRAKE ROD ADJUSTING NUT with tube- try Johnny Sells for these

1932-1934 45" and 1932-1934 C Singles.



4149-28, Harley-Davidson, 1928-1940.

Virtually indistinguishable from original. Heat Treated 4140 Chromoly to Rockwell 40C, Lever and Bracket. Bracket has casting number 1280-28 on the bottom. GL5 (EL/UL era), GL4 (VL era), or GL3 (early VL era) Clip available.

4149-28C Chrome Plated Lever, $181.

4149-28 Parkerized Lever, $146.



4150-28R - REPLACEMENT for ORIGINAL HAND BRAKE LEVER, LEVER- Parkerized $75, Chromed $110

We made a new mold. These will fit original 4151-28 Brackets, as shown in above photo. All Models, 1928-1940.



4153-28, Harley-Davidson, 1928-1940, Bracket Clip. GL5 (EL/UL era), GL4 (VL era), & GL3 (early VL era) in raised letters/numbers as per originals. The parts look much better than my photos.

4153-28-GL3, early VL era, $20.

4153-28-GL4, VL era, $20.

4153-28-GL5, EL/UL era, $20.



4521-26 - SWITCH KEY, BERYLLIUM-COPPER SPRING ALLOY, Cadmium Plated - $15 each

Don't settle for poorly made steel reproductions. These are made from BERYLLIUM-COPPER SPRING ALLOY. Key Tang has same 0.040" bends as originals and the heat treating keeps it that way so the keys won't fall out when riding.

1926-1936 All Models.

Vacuum Precipitation Hardened to Rockwell 40C.



4859-30A - RIGHT HORN BRACKET- $55

4860-30A - LEFT HORN BRACKET- $55

1930 - 45".

These will have to be fitted. Heat and bend the 4140 chromly steel castings with an oxy/act torch to achieve exact mounting of your horn.



5092-39 - LICENSE BRACKET - $60

Parkerized. All models 1939-1946. Also listed as part number 68150-39.

Heat Treated 4140 Chromoly to Rockwell 40C. Originals are spring steel.



11331-30A - JIFFY STAND, complete- $230

Ready to bolt on. All parts made in USA.

1930-1931 45" with 41/64" shaft hole.

JIFFY STAND LEG, Heat treated 4140 chromoly.



11331-32 - JIFFY STAND, complete- $230

Ready to bolt on. Comes with U-Bolt and nuts, not shown. All parts made in USA.

1932-1952 45" with 0.707" shaft hole.

JIFFY STAND LEG, Heat treated 4140 chromoly.



11525-26 - FORK STABILIZER - $90

Reproduction of factory part shown in 1929 accessory catalog. Singles, 1929-57 45", 1930-48 Big Twins

Chromed bronze. On the back: M.LAKE CO. Pat'd MAR 1928 BROOKLYN, NY



11525-30-B&S - FORK STABILIZER - BAR & SHIELD - $98

Reproduction of factory part. Singles, 1929-57 45", 1930-48 Big Twins

Chromed bronze. On the back: M.LAKE CO. Pat'd MAR 1928 BROOKLYN, NY



13201-30A - JIFFY STAND LEG - $100

1930-1952, 45" Twins. Made in the USA. Heat treated 4140 chromoly steel.

Exact duplicate of OEM part. Will work with OEM Bracket and attaching parts.



33061-52 - Starter Crank - $125, by the end of 2014

1952-1956 K models, 1957 to 1958 Sportsters.

Heat treated 4140 Chromoly Steel to Rockwell 40C.



33058-52A - Starter Crank - $125, by the end of 2014

1952-1970 KR, KHRTT, KRTT, XLRTT

Heat treated 4140 Chromoly Steel to Rockwell 40C.



51902-54 - SEAT BAR - $180

Solo seats. 1954-1956 K models, 1957 to late 1960's Sportsters. With SAE660 bronze bushings.

Looks just like the originals. 4140 chromoly steel cast bracket. Raised characters: "51910-52 C1 HZQ" clearly visable, as per originals.



AIRHORN LINKERT - NICKEL PLATED STEEL - $65

Open backed, 2 3/4" X 4". All letters in relief. Offered by Linkert in the 1930's and 1940's. Made in the USA.



http://www.mikespartsforharleys.com/